本文已被：浏览 735次 下载 303次
中文摘要: 某9E级燃气电厂，一台发电机出现失磁跳机。机组完全停下后，在运行现场检查后发现，内侧滑环 导电螺钉头部断裂飞出，造成导电螺钉及滑环烧毁。确认损坏部件后抢修，机组开机并网一切正常。将断裂 的导电螺钉进行分析，并对其做金相组织显微分析、成分检验和强度、硬度检验，并结合另一根完好螺钉及同 批次螺钉检查，确定事故原因，以此为依据对结构材料进行修改，保证机组未来运行安全。
Abstract:A 9E-class gas turbine power plant experienced a loss of magnetism and tripping. After the unit came to a complete stop，it was found after inspection of the operation site that the head of the conductive screwof the inner slip ring broke and flew out，causing the conductive screw and slip ring to burn out. After confirming the damaged parts，make an emergency repair，and the unit is turned
on and connected to the grid normally. Analyze the broken conductive screwand do metallographic microscopic analysis，composition
inspection，strength and hardness inspection，and combine the state of another intact screw and the inspection of the same batch of
screws to determine the cause of the accident. Modify the structural materials to ensure the safe operation of the unit in the future.
文章编号： 中图分类号：TK478 文献标志码：
基金项目:
| 作者 | 单位 |
| 曾宪英 | 南京汽轮电机（集团）有限责任公司 |
| Author Name | Affiliation |
| Zeng Xianying | (Nanjing Turbine & Electric Machinery ( Group) Co.，Ltd. |
引用文本：
作者.题名[J].刊名,出版年份,卷号(期号):起止页码.
[2]KIM K M, PARK J S, DONG H L, et al. Analysis of conjugated heat transfer, stress and failure in a gas turbine blade with circular cooling passages[J]. Engineering Failure Analysis, 2011, 18(4):1212-1222.
作者.题名[J].刊名,出版年份,卷号(期号):起止页码.
[2]KIM K M, PARK J S, DONG H L, et al. Analysis of conjugated heat transfer, stress and failure in a gas turbine blade with circular cooling passages[J]. Engineering Failure Analysis, 2011, 18(4):1212-1222.